Whirlpool dryer error code AF68

Understanding Whirlpool Dryer Error Code AF68

The Whirlpool dryer error code AF68 indicates a problem with the appliance’s airflow, which can lead to inefficient drying cycles and potential safety risks. This error typically occurs when the dryer detects restricted airflow, often due to lint buildup or blockages in the venting system. Users may experience longer drying times, increased energy consumption, and in severe cases, overheating, which poses a fire hazard. Addressing this issue promptly is crucial to ensure the dryer operates efficiently and safely.

Common Causes of Error Code AF68

• Clogged lint filter
• Blocked vent hose
• Obstructed external vent hood
• Damaged or kinked venting duct
• Excessive lint buildup in the dryer drum
• Faulty moisture sensor

Troubleshooting Steps for Error Code AF68

1. Turn off the dryer and unplug it from the power source.
2. Check and clean the lint filter thoroughly.
3. Inspect the vent hose for any blockages or kinks.
4. Ensure the external vent hood is free from obstructions.
5. Examine the venting duct for any signs of damage or excessive lint buildup.
6. Run a test cycle to see if the error code reappears.
7. If the error persists, consider checking the moisture sensor for functionality.
8. Reconnect the dryer to the power source and monitor its performance.

Maintenance / Prevention Tips

• Clean the lint filter after every load.
• Inspect and clean the venting system at least once a year.
• Use a vent cleaning brush to remove lint buildup.
• Ensure the dryer is installed with proper venting.
• Avoid using plastic or vinyl venting materials.
• Check the external vent hood regularly for blockages.
• Keep the area around the dryer clear of debris.
• Run the dryer on a high heat setting occasionally to help clear out lint.
• Consider using a dryer vent alarm to monitor airflow.
• Ensure the dryer is level to prevent airflow issues.
• Do not overload the dryer, as this can restrict airflow.
• Inspect the dryer drum for lint buildup regularly.
• Replace vent hoses if they are damaged or excessively worn.
• Use dryer sheets sparingly, as they can contribute to lint buildup.
• Check for any signs of overheating during operation.
• Keep the dryer door seal clean and free from lint.
• Schedule professional maintenance if you notice persistent issues.
• Educate all users on proper dryer operation and maintenance.
• Consider upgrading to a dryer with better airflow technology.
• Monitor drying times and performance regularly.
• Keep the dryer’s manual handy for troubleshooting tips.

FAQs about Whirlpool Dryer Error Code AF68

What does error code AF68 mean?

Error code AF68 indicates a problem with airflow in your Whirlpool dryer, often due to blockages or lint buildup.

How can I fix error code AF68?

Start by cleaning the lint filter, checking the vent hose, and ensuring the external vent is clear. If the problem persists, further inspection may be needed.

Is it safe to continue using the dryer with error code AF68?

It is not recommended to use the dryer until the issue is resolved, as it can lead to overheating and potential fire hazards.

Conclusion / Safety Notice

While troubleshooting and repairing your Whirlpool dryer can be a straightforward process, safety should always come first. If you are unsure about any steps or if the error persists after following the troubleshooting guide, it is advisable to contact a professional technician. They can provide expert assistance to ensure your appliance operates safely and efficiently.

Remember, regular maintenance and prompt attention to error codes like AF68 can help prolong the life of your dryer and maintain its performance.